Start with your tripod's top diameter
The number in each model name is the base diameter in millimetres: the LVL-42 has a 42mm base and the LVL-65 has a 65mm base. That base is what sits on top of your tripod, so match it to the platform you have rather than picking by price or load rating alone.
The 42mm base is designed to attach to all but the smallest travel tripods. The 65mm base is designed for larger full-sized tripods. If your tripod falls between those descriptions, check the actual top diameter before ordering; the supplied information lists five sizes in the series, so the right answer may be another model.
LVL-42 vs LVL-65 at a glance
Both models share the same levelling concept: a CNC-machined 1/2 ball with a single easy-grip locking knob, 360° rotation and a clear spirit bubble. The differences are size, weight, load capacity and tilt range.
- Base diameter: LVL-42: 42mm, intended for all but the smallest travel tripods. LVL-65: 65mm, intended for larger full-sized tripods.
- Weight: LVL-42 weighs 115g; LVL-65 weighs 250g. The lighter model suits a travel kit where every gram counts.
- Load capacity: LVL-42 is rated to 14kg; LVL-65 is rated to 26kg. Match this to the combined weight of your head and camera rig, not just the camera.
- Tilt range: LVL-42 tilts ±13°; LVL-65 tilts ±15°. Both rotate 360° for panoramic movement.
What each model gives you on the tripod
- Tripod Levelling Adaptor - 42mm base: LVL-42: 42mm base, 115g, 14kg load capacity, ±13° tilt, 360° rotation, one easy-grip locking knob and a clear spirit bubble. A light, compact levelling base for travel tripods that still need quick levelling on uneven ground.

Tripod Levelling Adaptor - 42mm base - Tripod Levelling Adaptor - 65mm base: LVL-65: 65mm base, 250g, 26kg load capacity, ±15° tilt, 360° rotation, one easy-grip locking knob and a clear spirit bubble. More base and more capacity for full-sized tripods carrying heavier heads and rigs.

Tripod Levelling Adaptor - 65mm base
Threads and adaptors: what fits out of the box
Both models have a built-in 3/8" thread in the base, factory fitted with a 1/4" adaptor, so they fit onto any tripod or monopod according to the supplied information. On top is a 1/4" thread that accepts any tripod head or camera with a 1/4" thread, and a second 1/4" to 3/8" adaptor is included to allow any tripod head to fit.
Larger heads with a 3/8" thread will need an adaptor, which the supplied information says should be provided by the brand as standard. If the brand does not offer one, or you are using an older tripod where the adaptor has been lost, a suitable 3/8" to 1/4" adaptor is available separately. Check the thread on your head before you start.
How to fit the levelling adaptor
Work with the tripod head off the tripod so you can access the top platform. The sequence below follows the supplied fitting instructions.
- Remove the tripod head: Take the head off your tripod. You may need to loosen the locking screws built into the top of the tripod first.
- Screw the adaptor onto the tripod: Thread the levelling adaptor onto the top of the tripod, then tighten the locking screws to ensure a solid fit.
- Screw the head onto the adaptor: Attach your tripod head to the 1/4" thread on top of the adaptor, using the included 1/4" to 3/8" adaptor if your head needs it.
- Tighten the ball locking screws: Tighten the locking screws built into the 1/2 ball level using the supplied 2.5mm hex key to ensure a solid fit.
- Level with the spirit bubble: Use the clear spirit bubble to check that the head and camera are level, adjusting with the easy-grip locking knob.
Level and pan without moving the legs
Once fitted, the adaptor lets you level the tripod in seconds on any terrain using the one easy-grip locking knob. The 1/2 ball tilts within its stated range and rotates 360°, so you can make fine corrections without adjusting individual tripod legs.
The spirit bubble gives you a visual check that the head and camera are level. For panoramic work, the 360° rotation lets you turn the camera while keeping the base level. The supplied information does not state independent pan and tilt drag controls, so treat the single locking knob as the levelling control rather than a substitute for a video head's drag system.
Which base suits your setup?
Use these profiles as a starting point, then confirm the base diameter and load against your own tripod and head.
- Travel and compact tripods: The LVL-42's 42mm base, 115g weight and 14kg capacity suit creators using a camera for video who do not want a dedicated video tripod, and landscape photographers levelling quickly on uneven ground.
- Full-sized tripods and heavier rigs: The LVL-65's 65mm base, 250g weight and 26kg capacity suit larger tripods where the head and camera together are heavier, and where the extra ±15° tilt range is useful.
- Wildlife and sports work: The supplied information lists wildlife photographers not using a gimbal and sports photographers wanting more control on a monopod. Both models fit a monopod via the base thread, but choose by the diameter and load of the support you actually use.
What the supplied information does not settle
The records do not list every tripod model each adaptor fits, nor do they give a maximum camera-and-head weight beyond the stated load capacities. They also do not confirm whether the locking knob offers separate pan and tilt tension. If your tripod's top diameter is not clearly 42mm or 65mm, check the other sizes in the five-size series before ordering.
The adaptor is a levelling tool, not a replacement for a tripod rated to your full rig weight. Keep the combined load within the adaptor's capacity and confirm the thread on your head before fitting.



