Fitting questions before you buy
- Will the VEO BA-185 fit my binoculars?
- Only if your binoculars have a 1/4" threaded socket. Check before buying. The adaptor is intended for roof prism binoculars, but some 50mm or larger models may have a smaller space for an adaptor to fit, so inspect the area between the objective lenses first.
- Where is the socket on my binoculars?
- It sits on the front, between the objective lenses, under a cap. Remove that cap to reveal the 1/4" threaded socket.
- Will it fit my tripod's 3/8" thread?
- No. The VEO BA-185 will not fit a 3/8" thread, which is often found on larger tripods. It is designed for a 1/4" thread.
- Do I need a quick release plate?
- Not if your tripod head is Arca compatible. The adaptor's base drops straight into the clamp. On a non-Arca head, you will need a separate quick release plate designed for that head.
The adaptor at a glance
- VEO BA-185 Arca Compatible Binocular Tripod Adaptor: VEO BA-185 Arca Compatible Binocular Tripod Adaptor, catalog price USD 16.75 (comparison price USD 25.00). A low-cost way to stabilise binoculars on a tripod or monopod without buying an extra Arca plate.

VEO BA-185 Arca Compatible Binocular Tripod Adaptor - VEO BA-185 Arca Compatible Binocular Tripod Adaptor: Mounts binoculars directly to a tripod or monopod, or onto an Arca compatible tripod head without an additional quick release plate. Covers both simple setups and heads that already use the Arca system.
- VEO BA-185 Arca Compatible Binocular Tripod Adaptor: Requires binoculars with a 1/4" threaded socket; will not fit a 3/8" thread. The two checks that decide whether the adaptor is compatible with your gear.
How to mount binoculars with the VEO BA-185
The sequence changes slightly depending on whether you are going straight onto a tripod or monopod, or onto an Arca compatible head.
- Reveal the socket: Take off the cap on the front of the binoculars, between the objective lenses, to expose the 1/4" threaded socket.
- Attach the adaptor to the binoculars: Screw the VEO BA-185 into the 1/4" socket and tighten it firmly.
- Option A: direct to tripod or monopod: Screw the adaptor onto the 1/4" thread of the tripod or monopod.
- Option B: onto an Arca compatible head: Place the base of the adaptor into the clamp of the head and tighten.
- Option C: onto a non-Arca head: Attach the adaptor to a quick release plate designed for that head, then use the head as normal. This keeps the easier aiming that a head provides.
Why use an adaptor instead of hand-holding?
The VEO BA-185 is aimed at longer viewing sessions in one position, such as watching from a bird hide or keeping an eye on a garden feeding station. Mounting the binoculars on a tripod or monopod removes the need to hold them steady, and using a tripod head lets you aim them much more easily than a fixed mount.
The Arca-compatible base also means a more solid grip with no risk of the adaptor loosening in use, and no extra spend on a spare quick release plate.
Tripod and head compatibility
- Can I use it on a non-Arca tripod head?
- Yes, but you will need a separate quick release plate designed for that head. Screw the adaptor onto the plate's 1/4" thread and use the head as normal.
- Can I use it on a monopod?
- Yes. The adaptor can screw directly onto the 1/4" thread of a monopod, as well as a tripod.
- What if my binoculars are 50mm or larger?
- The adaptor is intended for roof prism binoculars, but some 50mm or larger models may have a smaller space between the objective lenses for the adaptor to fit. Check that space before buying.
- Does the supplied information confirm every binocular model?
- No. The supplied information gives the 1/4" socket requirement and the roof prism/50mm note, but not a full model list. If your binoculars are not clearly covered, check the socket and the space between the objective lenses first.


