Why a long lens plate changes gimbal balance
A heavy lens on a gimbal only behaves predictably when its centre of gravity sits close to the gimbal's pivot. A short plate leaves little room to move the lens forward or back, so you end up compensating with the head or accepting a rig that wants to tip. The QS-110 Pro is a 110mm long Arca compatible quick release plate built to give you that sliding range, and Vanguard lists it specifically for finding the optimal balance on a long lens and preventing it twisting in use, especially on a gimbal.
That length is the practical difference. Instead of forcing a fixed mounting point, you position the lens along the plate until the rig sits level, then lock it down. The same movement lets you get closer to a subject without moving the tripod on a macro shoot.
Balancing a long lens on a gimbal with the QS-110 Pro
Work through these steps with the lens and camera supported, and tighten the clamp fully before you let go.
- Attach the plate to the lens or camera: The QS-110 Pro includes two removable 1/4" camera threads in an extended slot, plus a 1/4" to 3/8" adaptor. Use the adaptor when your lens or camera has a 3/8" connector, and choose the thread position in the slot that puts the plate where you need it. Vanguard lists four ways to tighten the plate: by hand using the D-ring, with an Allen key, a coin, or a screwdriver.
- Check the non-twist pin and rubber pads: The plate includes an adjustable non-twist spring pin and anti-slip rubber pads to provide a secure link to your lens. Set the pin to suit your lens foot before you mount the plate, so the plate cannot rotate once it is clamped.
- Seat the plate in the gimbal clamp: Slide the plate into the clamp on your gimbal. The QS-110 Pro is Arca compatible and works with other brands' Arca compatible heads that have the Arca style safety system built into the clamp. If your clamp does not use that safety system, check how the plate seats before relying on it.
- Slide to find balance, then record the position: Loosen the clamp just enough to slide the plate forward or back until the lens balances with the camera attached. The plate has a scale on each side so you can repeat settings with ease; note the number at the clamp before you tighten.
- Tighten and confirm the safety pins: Tighten the clamp fully. The base includes safety pins to keep the camera secure if the tripod head or gimbal clamp is not fully tightened, and these can be removed if needed. Leave them in place unless your clamp design requires otherwise.
What the QS-110 Pro gives you on the rig
- QS-110 Pro Arca Compatible Long Lens Plate: 110mm long and weighs just 60g, with a scale on each side that allows you to repeat settings with ease. The length provides the sliding range for balance; the low weight keeps it from adding meaningful bulk to a long lens rig; the scale turns a one-off balance point into a repeatable setting.

QS-110 Pro Arca Compatible Long Lens Plate - QS-110 Pro Arca Compatible Long Lens Plate: Two removable 1/4" camera threads in an extended slot, with a 1/4" to 3/8" adaptor. This lets you attach the plate to traditional cameras or more pro cameras with a 3/8" connector, and the extended slot lets you choose where along the plate the lens sits.
- QS-110 Pro Arca Compatible Long Lens Plate: Adjustable non-twist spring pin and anti-slip rubber pads to provide a secure link to your chosen lens. A long lens can apply leverage to the plate; these features are there to stop the plate rotating on the lens foot.
Using the sliding adjustment beyond the gimbal
The same forward-and-back movement is useful on a macro shoot. With the camera on a tripod, loosen the clamp and slide the plate to move the lens closer to the subject without repositioning the tripod legs. Because the plate carries a scale on each side, you can return to a previous position after moving it.
On a gimbal, resist the temptation to balance by adjusting the head alone. Slide the plate first, then fine-tune with the head. That order keeps the lens centred over the pivot and makes panning and tilting feel more even.
When the QS-110 Pro is the right plate, and when it is not
This is a long lens and balance plate, not a universal camera plate. Match it to the job.
- Choose the QS-110 Pro if: You shoot a long lens on a gimbal or tripod head and need sliding range to find balance, or you want a repeatable position for macro work. It suits lenses and cameras with either a 1/4" or 3/8" connector thanks to the supplied adaptor.
- Look at a shorter plate if: You mainly need a compact plate for a camera body with no long lens foot. The QS-110 Pro's 110mm length is there for balance range, and a shorter plate may be simpler for a small kit.
- Check your clamp first: The plate is Arca compatible and Vanguard lists compatibility with other brands' Arca compatible heads that have the Arca style safety system built into the clamp. If your clamp does not have that system, confirm the fit before you rely on the safety pins.
What to confirm before you buy
The supplied information does not list a maximum load for the QS-110 Pro, so treat your lens and camera combination as something to check against your head and clamp rather than a figure quoted here. It also does not specify which gimbal models have been tested; compatibility is stated in terms of Arca compatible heads with the Arca style safety system in the clamp.
The plate is available in a Standard variant. If you need a different thread size or a different plate length, check the rest of the Vanguard quick release plate range rather than assuming this plate will adapt.


